| Customization: | Available |
|---|---|
| Type: | Neutral Point Grounding Resistor Cabinet for Trans |
| Model No.: | Scb10-35kv |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The SC (B) 10 series epoxy cast non excited pressure regulating dry transformer is made of F-grade epoxy resin mixture with fillers. After vacuum film degassing, the inner and outer surfaces of the thin layer casting are placed on high and low voltage coils reinforced with glass fiber forming mesh under vacuum and pressure. A dry-type transformer with high mechanical strength, electrical strength, and heat resistance. It is an excellent product for urban power grid renovation, especially suitable for important places such as high-rise buildings, airports, power stations, and commercial centers that require fire prevention, explosion prevention, and moisture prevention.
Introduce:
SC(B)10 35KV grade epoxy casting non-exciting voltage regulation dry transformer is made of F grade epoxy resin mixture with packing, degassed by vacuum and pressure.The thin layerof casting is placed on the in side and outside the surface of the glass wire molding net reinforced high and low voltage coil.It is a dry type transformer with high mechinical strength,electrical strength and heat resistance.
Product Features
1. Flame retardant, explosion-proof, no pollution, no maintenance, can be dispersed in the load center, reduce the investment costs and save costs.
2. Low loss, good power saving effect, bringing economic benefits to operation.
3. The local discharge power is less than 10PC, the coil does not absorb moisture , does not vacuum, high mechanical strength, good reliablity. Cost saving.
4. Short circuit resistance, good lightning impact resistance.
5. The shell is made of three materials: stainless steel, cold plate, and aluminum alloy. The types are divided into wide type and heat dissipation type. The inlet and outlet lines can be upper and upper,lower and lower.
6. The transformer can be equipped with temperature control and temperature display system according to the user's needs,and can be used with the temperature control system.
Mode |
Rated Current (A) |
High Voltage | Low Voltage | Connectic symbol |
No-load Current (%) |
No-load Loo (W) |
Load Loos(120ºC) (W) |
LmpedanceVoltage mm |
| SC10-315 | 9.09 454.7 |
20±2×2.5%
|
0.4 | Yyn0,Dyn11 | 0.7 | 960 | 4060 | 6 |
| SC(B)10-400 | 11.5 577.4 | 0.6 | 1140 | 4820 | ||||
| SC(B)10-500 | 14.4 721.7 | 0.6 | 1330 | 5760 | ||||
| SC(B)10-630 | 18.2 909 | 0.5 | 1510 | 6800 | ||||
| SC(B)10-800 | 23.1 1154.7 | 0.5 | 1730 | 8220 | ||||
| SC(B)10-1000 | 28.9 1443.4 | 0.5 | 2040 | 9730 | ||||
| sC(B)10-1250 | 36.1 1804.3 | 0.5 | 2360 | 11480 | ||||
| SC(B)10-1600 | 46.2 2309 | 0.5 | 2760 | 13790 | ||||
| SC(B)10-2000 | 57.7 2886.7 | 0.5 | 3200 | 16280 | ||||
| C(B)10-2500 | 72.2 3608.4 | 0.4 | 3820 | 19270 |
){kind=link}